SAL PIXIE Plus Smart Lighting, Alice Springs
- SAL PIXIE Plus Range
- 32 Products To Choose From
- Supplied & Installed By Us
Smart lighting, fans, power points and blinds on one app, over Bluetooth, on normal wiring. This is the SAL PIXIE Plus range. Pick what you like, add it to your list, and we quote to supply and install it in Alice Springs. Licensed NT electrical contractor C 4385. Call 0438 478 116.
Image: SAL / PIXIE Plus
- Master Electricians Australia, Silver Member
- Gallagher SMB Solution Partner
- SAA accredited Grid Connect Design & Install, David Sawtell
- Level 1 Thermography Certified
- NT Electrical Contractor Licence C 4385
- Commercial subcontract work
Want smart lighting installed in Alice Springs? This page is the product range. For how we design and install a smart home, see smart home lighting in Alice Springs
Looking for lights, power points or switchboards? See the electrical range. Cameras? See the Hanwha camera range.
What PIXIE Plus Is
PIXIE Plus is a smart home system from SAL National, an Australian family business. The switches, dimmers, power points, sensors and controllers talk to each other over Bluetooth mesh, a self-healing wireless network through the house. You run it all from one app, from a wall button or touch panel, or by voice. There is no central controller rack: no hub is needed for control inside the home, and a plug-in Gateway adds voice control and remote access when you want it.
It goes in on standard Australian wiring and fits most branded wall plates, so a licensed electrician can fit it to a home that is already built, without chasing new cables through every wall.
How It Compares With A Wired System Like C-Bus
A wired automation system such as C-Bus gives one control for the whole building: scenes, schedules and dimming, with a dedicated control cable running between its devices. PIXIE Plus does the same kind of job a different way. It uses Bluetooth mesh on your normal wiring, so there is no separate control cable to run. That is why it suits retrofits and renovations, and why you can start with one room and add more later.
For a large new build where the cabling is planned from the start, a wired system can still be the right choice. We will tell you which fits your job.
Which Suits?
- One room. A dimmer or switch in place of the one on the wall, a wall controller if you want a scene button, and the app. Add the Gateway if you want voice control.
- The whole home. Dimmers and switches in every room, smart power points, fan control and blinds, tied together with scenes such as Welcome Home and Goodbye. A touch panel by the door gives you the lot in one place.
- A shop or office. Motion sensors and timer switches turn lights and exhaust fans off when nobody needs them, and schedules run the signs and outdoor lights. The Gateway lets you check and change things from anywhere.
Browse The Range
Press a product name to open its page on the maker's site. Not sure which suits? Add a few to your list and we will tell you what fits your place. Prefer to talk it through? Call 0438 478 116.
My list
Your list stays in this browser. "Quote me for this list" puts it into the quote form below; nothing is sent until you press Send.
Dimmers and switches (5)
Smart dimmers, switches and timer switches that replace the ones on your wall. They fit most branded wall plates.
Image: SAL / PIXIE Plus
G3 Smart Dimmer
SDD300BTAM
Dims LED, halogen and tungsten lights from the app, by voice or from the wall.
RippleShield Dimmer
SDD400RSBTAM
Two-wire colour-tunable LED dimmer, no neutral needed, 3000K to 6500K, for human centric lighting with SAL Coolum PLUS RS downlights.
G3 Smart Switch
SWL600BTAM
Smart switching for lights, fans, exhaust fans and pool pumps, with scheduling. 600W rated.
G3 Smart Timer Switch
STS600BTAM
Timer run-on for bathroom exhaust fans and outdoor lights, from 1 minute to 24 hours. Works without the app or a gateway.
Scene controllers, touch panel and wall plates (6)
Wall buttons, dials and a touch panel to run scenes without the phone, and the plates they sit in.
Image: SAL / PIXIE Plus
Multifunction Controller
SMFBTAS
A wall button for any device, group or scene. Single tap and double tap.
Multifunction Rotary Controller
SMFRBTAS
A wall dial for dimming groups, ceiling fan speed and blinds. Up to 6 scenes from one device.
Remote Control Button
SMC3BTAS
Battery powered stick-anywhere button. No wiring and no wall plate needed.
Remote Control Mech
SMRMBTAS
Battery powered switch that fits a standard Australian wall plate, where running a cable is hard.
Ambience Touch Panel
STP54BTAS
A 5.5 inch colour touch panel with four wall buttons, for rooms, devices, groups and scenes.
Ambience Wall Plates
SWAC1GW to SWAC6GW
1 to 6 gang plates in Gloss White, Matt White, Matt Black and Matt Grey, plus an XL white. Smart and ordinary switches on the same plate.
Smart plugs and power points (2)
Smart double power points with a control on each socket.
Image: SAL / PIXIE Plus
Smart Double Power Point
SPO23BTAM
Each socket switched on its own, with scheduling, a child lock and 24 hour power monitoring. Four faceplate styles.
IP66 Weatherproof Enclosure
SWPXG66CL
A tough outdoor housing for PIXIE and standard power points, IP66 and IK09, with a padlock fitment.
Gateway, range and links (6)
The gateway adds voice control and remote access. The rest extend range or link other systems.
Image: SAL / PIXIE Plus
Gateway (Gen 3)
SGW3BTAM
The hub that adds remote access from anywhere and voice control through Google, Alexa and Siri Shortcuts.
Portal Mesh Extender (pair)
SPT321WS-BTAS
Links a separate building such as a shed or guest cottage to the same system, up to 120 m.
Bluetooth Mesh Signal Booster
SGB3BTAS
Extends signal coverage of an established system in larger homes.
Contact Sensor Transceiver
PC100CS/R/BTAM
Push notifications from gate, door or window contacts, or from a smoke alarm's dry contact.
Translator (dry contact input)
PC100T/R/BTAS
Lets another system's volt-free contact, such as an alarm, trigger a PIXIE response.
Dual Relay Controller
PC206DR/R/BTAM
Dual relay controller for larger loads, with a built-in mesh booster and power outage memory.
Sensors (5)
Motion sensors that can be switched between modes from the app, and contact sensors for garage doors.
Image: SAL / PIXIE Plus
Smart PIR Sensor, indoor ceiling mount (Gen 3)
360 degree motion detection to 8 m, hold time from 10 seconds to 30 minutes, three operating modes.
Smart PIR Sensor, outdoor wall mount, IP66
Motion and daylight detection to 12 m, white or black, four operating modes including photocell.
Roller Door Contact Sensor
CSR41BTP
Tells the system if a roller door is open or closed. Has its own receiver built in.
Metal Door Contact Sensor
CSM41BTP
For metal gates and doors. Reed switch and magnet, with its own receiver.
Flush Mount Contact Sensor
CSF21BTP
For wooden doors and wooden framed windows. Sold as a pack of sensor and magnet pairs.
LED strip and controllers (3)
One controller for most LED strip types, and complete strip kits.
Image: SAL / PIXIE Plus
Universal LED Strip Controller
LT8915RTW-BTAM
Handles single colour, RGB, RGBW, tunable white and RGBTW strip, 12V or 24V, up to 12A, with smooth deep dimming.
COB CCT LED Strip Kit (2 m and 5 m)
FLBP24V2M/CCT/BTAM and FLBP24V5M/CCT/BTAM
Dot-less tunable white strip, 2700K to 6500K, with driver and PIXIE controller. Can run human centric lighting.
COB RGB LED Strip Kit (2 m and 5 m)
FLBP24V2M-RGB-BTAM and FLBP24V5M-RGB-BTAM
Dot-less full colour strip with driver and PIXIE controller, with beat sync through the app.
Ceiling fan control (3)
Speed, scheduling and grouping for the fans you already like.
Image: SAL / PIXIE Plus
Hunter Pacific DC Fan Module
PIXIEM098
Control for most Hunter Pacific DC 9-speed ceiling fans. Compatibility varies by model.
Ventair Skyfan FanLink Module
FLINKPIX
Plugs into the Skyfan receiver port with no extra wiring. Black or white.
0-10V Fan Controller
PC152V/R/BTAM
Brings 0-10V fans such as Big Ass Fans into the system, with speed, scheduling and grouping.
Blinds, curtains and garage doors (2)
Motorised blinds, curtains, awnings, gates and garage doors on the same app.
Image: SAL / PIXIE Plus
Blind, Curtain and Awning Controller
PC206BS/R/BTAM
Two 6A relays for motorised roller blinds, curtains, awnings, gates and more, with a built-in interlock.
Garage Door and Gate Controller
PC206GD/R/BTAM
Two relays for up to two garage doors or gates, with control from the app, Apple Watch, voice or a wall button.
Questions Alice Springs customers ask
What is PIXIE Plus?
PIXIE Plus is a smart home system made by SAL National, an Australian company. The switches, dimmers and power points talk to each other over Bluetooth mesh and are run from one app or by voice. A licensed electrician installs it on standard Australian wiring.
Do I need a central controller?
No hub is needed for control inside the home. The Gateway is the one plug-in extra, and it adds voice control and remote access from anywhere.
Is it like C-Bus?
It does the same kind of job: scenes, schedules, dimming and one control for the whole house. The difference is how it is built. A wired system such as C-Bus runs a dedicated control cable between its devices. PIXIE Plus uses Bluetooth mesh on your normal wiring, so it can go into a home that is already built. For a large new build with the cable run planned from day one, either approach can suit. We will tell you which fits your job.
Does it need the internet?
Control at home works over the Bluetooth mesh. Voice control and remote access need the Gateway and your internet. Some devices, such as the timer switch, also work on their own from the wall.
Does it work with Google, Alexa and Siri?
Yes, through the Gateway. SAL lists Google, Alexa and Siri Shortcuts, plus Apple Watch, SmartThings, IFTTT and SONOS.
Can I start with one room?
Yes. Many people start with one room and add to it later. All the devices work together on the same app.
How much does it cost installed?
It depends on the rooms and what you want to control. Add the items you like to your list and send it to us. We quote the whole job. The quote is the price.
Do you work outside Alice Springs?
Yes. We work up to about 500 km from Alice Springs. For sites further out we usually quote from photos or satellite imagery first.
General information only. These answers are a starting point, not a substitute for a licensed electrician. If you're ever unsure, smell burning, see sparks, or a switch won't reset, stop and call us.
Quote to Supply and Install
Call or text a photo of what you need. We're local, licensed and insured, and we take calls 24/7. You get a clear quote for the job and a tidy finish, every time.
Emergency calls day and night • Free on-site quotes in town • Service calls charged by the hour, one-hour minimum